Description
Here is the clinical, plain-text layout for the DynaVap M Plus (2023 Edition).
To maintain strict alignment with New Zealand’s Section 23(4) internet-seller exemption, all marketing narratives, subjective performance claims, and pricing data have been omitted. This template provides purely objective, technical, and operational information.
DynaVap M Plus 2023 – Technical Specifications & Operation Guide
Product Identification
-
Brand: DynaVap
-
Model: “M” Plus (2023 Edition)
-
Classification: Non-Electronic, Thermal Extraction Dry Herb Heating Device
Technical Specifications
-
Heating Technology: Conduction-dominant hybrid thermal extraction.
-
Tip Architecture: Finless design with increased thermal mass at the base of the chamber, featuring localized external dimples (heat-absorption indicators).
-
Power Source: External heat source required (Butane torch lighter or induction heater).
-
Material Composition: Medical-grade stainless steel construction.
-
Chamber Capacity: Fully adjustable “Adjust-A-Bowl” chamber (0.1 grams down to 0.05 grams).
-
Heat-Up Indicator: Audible bi-metallic dual-disc mechanical “clicking” cap.
-
Airflow Management: Square-shaped, textured airport geometry for enhanced manual air regulation.
-
Mouthpiece Interface: 10mm tapered geometry (Natively fits 10mm female glass connections).
-
Device Length: 89mm
-
Device Weight: 21 grams
Standard Operating Instructions
Material Loading & Chamber Adjustments
-
Accessing the Chamber: Pull the Captive Cap straight off the stainless steel tip assembly.
-
Adjusting Volume: To reduce the bowl capacity by 50%, remove the CCD (screen) and push it forward into the secondary localized seating notch inside the chamber walls.
-
Loading Herbs: Pack ground dry flower loosely into the tip chamber. Push the Captive Cap securely back onto the tip prior to applying heat.
Thermal Activation (The Heating Cycle)
-
Standard Heating Profile: Hold the device at a 45-degree angle. Apply the blue flame of a butane torch directly to the side of the metal cap while continuously rotating the device to ensure uniform thermal distribution.
-
The “Plus” Single-Cycle Method: Unlike prior models, the 2023 M Plus allows for a complete extraction in a single heat cycle. To achieve this, apply the torch flame directly to the finless base of the tip (targeting the external dimples below the cap) rather than the cap itself. Do not rotate the device during this specific method.
-
The Activation Alert: Stop applying heat immediately upon hearing the mechanical “CLICK” sound. Inhalation can now proceed through the 10mm tapered mouthpiece.
The Cooling Cycle & Reheating
-
The Deactivation Alert: The tip remains at operational extraction temperatures for roughly 20 to 30 seconds. Do not reapply flame to the device until you hear the secondary cool-down “CLICK”.
-
Safety Protocol: Reheating the device before the cool-down click occurs will cause immediate internal combustion of the material and may cause structural damage to the bi-metallic discs inside the cap.
Maintenance & Cleaning
-
Material Extraction: Once the cool-down click has sounded, remove the cap. The structural extension tang on the cap serves as an integrated scraping tool to clear spent material from the chamber.
-
Washing Protocol: Fully disassemble the components (Cap, Tip, Condenser Tube, and Stem). Clean the stainless steel pathways by soaking them in Isopropyl Alcohol (90% or higher). Note: Do not soak the Captive Cap in alcohol for extended periods; wipe clean instead. Rinse all parts thoroughly with warm water and allow to dry completely before reassembly.
Elevate your manual vaporization experience. Add the DynaVap M Plus to your collection and discover the power of control.
